Cost-saving, environmentally friendly sample storage with reduced frost accumulation
The MDF-DU700ZH-PE FrostLess -86°C Upright Freezer with reduced frost build-up on the inner doors. Provides optimum sample storage capacity within a compact footprint combined with natural refrigerants to minimise energy consumption, reduce environmental impact and save money.
FrostLess Technology
A new thermal insulation design for the inner doors suppresses frost growth on the inner door surface, resulting in reduced frequently manual labor and time to defrost by 60%.
Inventer Compressor
While conventional freezers use single speed compressors which cycle on and off, the MDF-DU700ZH-PE freezer contains inverter compressor that can run at different speeds to maximise cooling performance under different conditions. Combined with hydrocarbon refrigerants, there compressors ensure the most efficient energy use and reduced heat output.
Contact us
Reducing Frost Growth
This new improvement of the packing and insulation materials, and the heated pipe frame of the inner door gasket results in reduced manual labor and time along with less defrosting frequency required. Moreover, suppressing frost growth on areas which may cause damage and deterio-ration of freezer components.
New Thermal Insulation
The new design of the inner doors with VIP panels and the new thermal insulation technology of the frame will suppress frost growth.
Environment Condition: Temp./Humidity: 30˚C/80%. Door Opening/Closing: 150 times, 30 sec/n. Period: 30 days. No Load.
