MCO-170AICUVHL-PA

Cell Culture Incubators Capabilities

As a crucial piece of laboratory equipment, PHCbi brand cell culture incubators are designed to ensure highly accurate, reproducible chamber conditions. Our cell culture incubators provide a contamination-free environment while allowing precise CO₂ or CO₂/O₂ control - essential for in vivo environment replication.

Time Saving Decontamination

An integral decontamination system using hydrogen peroxide (H₂O₂) vapor safely cleans the interior chamber in less than three hours after initiation. This system is safe, efficient and effective against contaminants that typically enter the incubator during door openings. A 100% kill rate with at least six log reduction is documented against major pathogens. Following cleaning, the SafeCell™ UV light reduces H₂O₂ to harmless water vapor and the incubator can be immediately placed back into service.

Uniform and Consistent Environment

The patented Direct Heat and Air Jacket system, IR2 sensor, SafeCell™ UV and inCu-saFe^® work together to ensure precise temperature, CO₂ levels and H₂O₂ contamination control respectively for a precise and repeatable environment.

Rapid CO₂ Recovery with IR2 Sensor

Proprietary IR2 sensor provides superior CO₂ control with fast recovery without overshoot even following multiple door openings.

Contamination Control with SafeCell UV and InCu-saFe

PHCbi's inCu-saFe combines the germicidal properties of elemental copper with the corrosion and discoloration resistance of stainless steel to deliver passive contamination control throughout the chamber interior. The SafeCell UV lamp provides safe, active and passive contamination control of circulated air and the humidity water reservoir. SafeCell scrubs and decontaminates circulated chamber air without affecting cell cultures in situ.

Color LCD Display

The high contrast color LCD display allows for easy, touchscreen programming of temperature, CO₂ and other internal conditions of your incubator even with gloved hands.

USB Log Function for Data Transfer and Storage

A standard USB port simplifies the storage or transfer of logged data.

The Next Generation of Laboratory Incubator Technology

The PHCbi Cell-IQ CO₂ incubator design and touchscreen panel deliver exceptional ease of use, effortless cleaning and maintenance as well as outstanding performance with multilevel H₂O₂ contamination control.

The MCO-170AICUVHL-PA laboratory incubator is designed for demanding and regulated applications in the biomedical, pharmaceutical, medical research and clinical laboratory applications. The Cell-IQ CO₂ incubator offers the ideal environment for all your research needs. The MCO-170AICUVHL-PA unit includes a touchscreen control panel that delivers improved usability, an optimized interior structure with technology for rapid cleaning, and a proprietary infrared sensor for stabilizing temperature, CO₂, and humidity levels.

Request a Quote

EXTERIOR DIMENSIONS	24.4" W x 28.7" D x 35.6" H (620 x 730 x 905 mm)
INTERIOR DIMENSIONS	19.3" W x 20.6" D x 26.2" H (490 x 523 x 665 mm)
INTERIOR VOLUME	5.8 cu.ft. (165 L)
DATA ACQUISITION	Optional analog on cloud-based monitoring
OUTER DOOR	Painted steel
SHELVES	18.5" x 17.7" (470 x 450 mm)
ACCESS PORT	1: Back side (1.2" (30 mm) diameter)
INSULATION	Extruded polystyrene foam
AIR FILTER	0.3 um, Efficiency: 99.97 % or higher
UV LAMP	4W x 1 (ozone-free emission)
NET WEIGHT	176 lbs (80 kg)
TEMPERATURE CONTROL RANGE	Ambient temperature +º5C to +50ºC
TEMPERATURE UNIFORMITY	±0.25ºC (ambient temperature: 23ºC, setting: 37ºC, CO2: 5 %, no load)
MAXIMUM POWER CONSUMPTION	Max. 376 W
CO2 CONTROL RANGE	0% to 20%
CO2 CONTROLLER	PID Control System
CO2 GAS CONNECTION	0.157 inch to 0.36 inch (4 mm to 6 mm) diameter tube can be connected
CO2 GAS PRESSURE	0.03 MPa(G) (0.3kgf/cm2(G),4.3 psi(G))
CO2 VARIATION	±0.15% (ambient temperature: 23ºC, setting: 37ºC, CO2: 5%, no load)
CO2 SENSOR TYPE	Dual filter infrared sensor
DATA OUTPUT	USB
DECONTAMINATION METHODS	SafeCell ultraviolet light. Hydrogen peroxide (H2O2) vapor system
CONTAMINATION CONTROLS	InCu-SaFe copper enriched stainless steel interior and shelves, SafeCell UV light
DECONTAMINATION CYCLE TIME	< 3.0 Hours
DISPLAY	LCD touchscreen
HEATING SYSTEM	Direct Heat and Air Jacket System
HUMIDIFYING SYSTEM	Natural evaporation with humidifying pan, 95 %R.H.±5 %R.H.
INTERIOR SURFACES	InCu-saFe stainless steel with copper enriched alloy

Price

MCO-170AICUVHL-PA	Price Upon Inquiry. Please contact us.

• MCO-170AICUVHL-PA Product Sheet

  Download

• CO2/O2 Incubator Brochure

  Download

• Infrared vs. Thermal Conductivity Sensors

  Download

• HEPA Filter vs. Ultraviolet Light

  Download

• Cell IQ FAQs

  Download

• Water Jacketed vs. Air Jacketed CO2 Incubators

  Download

• Contamination Control Methods in CO2 and Multigas (CO2 and O2) Cell Culture Incubators

  Download

• Gas Controlled Incubators Warranty Statement

  Download